This project is an interface board to connect two USB controllers to the DB9 controller ports of an Atari ST/Amiga system. This is a sequel to the "USB Controller adapter" project : it provides two ...

The Synopsys USB 1.1 Controllers support Full and Low Speed based on USB specification from the USB Implementer Forum. The Synopsys USB 1.1 IP offering consists of the USB 1.1 Device and USB 1.1 OHCI ...

The USB 3.0 Device Controller implements all of the digital layers defined by the USB 3.0 Specification and is fully backward compatible with USB 2.0. The USB 3.0 Device provides a dedicated dual ...

Apple is upgrading its entire iPhone line to USB-C. The microcontroller required for this has now been decoded.

The USB2DB15 adapter is an Open Sourced device based on an AVR microcontroller. It adapts a USB controller for use with a Jamma PCB via a Supergun or Neo-Geo hardware with controller ports. Presently, ...

Hacking ensued. The hack consists of a small breakout board that enables a USB-C connector to be fitted into the PS4 controller in place of the original micro USB port. [Ian] explains what needs ...

The new Apple iPhone USB-C controller has been hacked in a worrying first. The hacker behind it explains what they did along with the security implications.

This wasn’t the case with the first generation Xbox controller, though, and although its proprietary connector was actually using USB, the controller scheme wasn’t as open. This is [Tom]’s ...

Introduced with iPhone 15 and iPhone 15 Pro, the ACE3 USB-C controller is much more than a standard USB-C chip; it also runs a complete USB stack and connects to internal devices buses including ...

A security researcher has been able to hack Apple’s USB-C controllers that are used in current iPhones, which would usually raise concerns about security and the ability to jailbreak the iPhone.