At the amplifier end combine all the relevant wires (all positive and all negative wires) together so that you can use two spades (or Banana-Plugs) per cable. Twist all related wires together, then ...

Chances are you’ve come across an Ethernet cable where the small plastic tab that holds the plug in place has broken off. We have a crimper on hand and usually just throw on a new RJ45 connector ...

In the End, one way or the other you should now have four red and four black leadout-wires with some form of termination on the end of the wire. I always crimp my Radioshack Spades onto the Cable ...

Reconnect the ends: Now reconnect the separated cable. This works best with crimping pliers, but you can also twist the conductors together by hand and wrap them with insulating tape. Heat-shrink ...

Most lineman’s pliers appear almost identical to one another, but some have extra tool functions like crimpers ... a better ...

Our automatic crimping pliers for wire ferrules 97 53 14 and the chrome-plated version 97 55 14 have been both updated and now come with greater capacity! The new versions crimp single wire ferrules ...

The OpenPodcar is an affordable and open source hardware and software platform for self-driving car research. It can be used for general autonomous vehicle research as well as for human-robot ...

When it comes to no-fuss wire connectors, Wago clamp connectors are an attractive target to save some money on due to their perceived high cost. But how expensive are they really? This was the ...

The Umbilical cable is a 220-240mm dual ended 20P (2x10 ... endswitch pin and connect it the E0-STOP pin using a simple self-made JST 2-pin to 3-pin adapter (See Photos folder) or by removing the ...