I am trying to create delay with timer. I have read in timer document that in 6713 processor timer run at (CPU clk/4), but I have confusions that it seems to me that it does not run (CPU clk/4), and ...

Is there material in TI or 3rd party that cover topic about State Machine function prototypes, commonly used in DMC example projects Below is an example ...

In SN74LVC8T245 ,Input transition rise or fall rate is showed below, as my case,VCCI=1.8V,that is to say the max rise time is 1.8*20=36ns? If the rise time of the signal into the part is 80ns，what ...

I was hoping to get the specifications/datasheet for the 7840-08-0015 Nova Transformer labeled T1 on the BOM, specifically the 1.2 mH, with description: Transformer, Phase Shifted Full Bridge.

The datasheet and register map description shows two different formulas to calculate the INSTCAL_DLY value. In the Register Map document (snau251a.pdf) Page 8, INSTCAL_DLY = T x fOSCIN / (2CAL_CLK_DIV ...

Currently we configure the CAN driver according to the demo of "tda4-s2/rtos-sdk/pdk_j721s2/packages/ti/csl/example/mcan/mcanEvmLoopback/mcan_evm_loopback_app_main_k3 ...

I have two questions about TUSB7320/TUSB7340: - Can TI TUSB73x0 work with xHCD in Linux Kernel directly (Without any modification or adaption for xHCD)? - Can TI TUSB73x0 work with HCD (Host ...

I have come across SBL boot in MCU+SDK that it has a secure boot support. My question is in an AM62X platform for a fully secured device (HS-SE), if it is possible to use the M4F core with full ...

I`m using CSD17308Q3 Pspice model to simulate in cadence/virtuoso_spectre, it report "Cannot run the simulation because the syntax error `Unexpected end of file ...

First, welcome to the TI E2E community. Unfortunately, there are no Verilog or VHDL models available, only IBIS and SPICE models. The SPI interface follows the industry standard mode 3, CPOL=1, CPHA=1 ...

i am working on a circuit which determines whether the battery is healthy or not using led, i have drawn the circuit on tina ti but i am not able to identify how to simulate the circuit and how to see ...